HP dx7300 2.5 Specifications, Table, Table, Electrical Specifications, Environmental Specifications (Factory Configuration)

System Overview

2.5 Specifications

This section includes the environmental, electrical, and physical specifications for the systems covered in this guide. Where provided, metric statistics are given in parenthesis. Specifications are subject to change without notice.

Table 2-7

Environmental Specifications (Factory Configuration)

Parameter Operating Non-operating

Ambient Air Temperature 50o to 95o F (10o to 35o C, max. rate of change < 10°C/Hr)

-22oto 140o F (-30oto 60o C, max.

rate of change < 20°C/Hr )

Shock (w/o damage)		5 Gs [1]	20 Gs [1]
Vibration	0.000215	G2/Hz, 10-300 Hz	0.0005 G2/Hz, 10-500 Hz
Humidity	10-90%	Rh @ 28o C max.	5-95% Rh @ 38.7o C max.
	wet bulb temperature		wet bulb temperature
Maximum Altitude	10,000 ft (3048 m) [2]		30,000 ft (9144 m) [2]

NOTE:

[1]Peak input acceleration during an 11 ms half-sine shock pulse.

[2]Maximum rate of change: 1500 ft/min.

Table 2-8

Electrical Specifications

Parameter	U.S.	International
Input Line Voltage:
Nominal:	100–240 VAC	100–240 VAC
Maximum:	90–264 VAC	90–264 VAC
Input Line Frequency Range:
Nominal:	50–60 Hz	50–60 Hz
Maximum:	47–63 Hz	47–63 Hz
Power Supply:
Maximum Continuous Power:
USDT	200 watts	200 watts
ST or SFF	240 watts	240 watts
MT/CMT	365 watts	365 watts
Maximum Line Current Draw:
USDT	4 A @ 100 VAC	2 A @ 200 VAC
SF or SFF	5 A @ 100 VAC	2.5 A @ 200 VAC
MT/CMT	6 A @ 100 VAC	3.0 A @ 200 VAC
.

2-24 www.hp.com Technical Reference Guide