NOTE

2 system features

network interface

network interface

All HP e-pcs feature an integrated 10/100 3Com network interface equivalent to the 3C905C-TX network interface card.

This network solution is a 32-bit PCI Ethernet Controller with advanced manageability capabilities. It features full-duplex, automatic 10/100 BT port selection, Remote Wake-Up (RWU), and, depending on OS support, Remote Power-On (RPO).

A 3COM LAN Boot ROM is integrated in the BIOS ROM chip on the system board.

specifications

 

Ethernet IEEE 802.3 industry standard 10 Mbps baseband CSMA/CD

Network Interface

(10BASE-T) and 100 Mbps baseband CSMA/CD (100Tx, FX) standards, 10

 

Mbps baseband CSMA/CD (10BASE2 and 10BASE5).

 

 

I/O Base Address: The NIC address can be selected

Any 32-bit I/O base address NIC occupies 32 bytes of I/O space

using diagnostic software provided with the driver

 

 

 

Transmit/Receive Buffer Memory

4 KB. 2 KB transmit, 2 KB receive

 

 

Labels

Microsoft PC97, Microsoft PC98, Microsoft PC99, Net PC, PCI 2.2

 

 

Manageability

DMI 2.0 and 2.0s

 

 

Power Management

ACPI 1.0

 

 

Pre-OS boot protocol support

PXE, BootP/DHCP, NCP, RPL

 

 

network interface advanced features

The 3Com chip supports First Plug Remote Power On. This means that once the HP e-pc is set up and connected, if a Magic Packet is sent from a server, the HP e-pc powers on.

TCP/IP Ping Wake-up is supported under Windows 98 and Windows 2000 in ACPI mode.

23