Operating the Monitor

Enhancing the Video Function

The monitor includes a zoom feature that allows you to adjust the viewable image to full screen display. It enhances video performance by changing the screen’s aspect ratio, the ratio of the picture’s width to its height, to get 4 to 3 (standard broadcast) and 16 to 9 (widescreen) formats. The zoom feature is available when the signal input selection is set to super video or component video.

To use the zoom feature:

1.Press the Input button on the front panel of the monitor to select one of the following video sources: S-video or Component Video.

2.Press the Menu button on the front panel of the monitor to launch the On Screen Display (OSD) Main Menu.

3.Select Image Control from the OSD Main Menu. When the Image Control menu opens, scroll down to select Image Zoom.

4.In the Image Zoom menu, use the OSD up and down buttons on the front panel to select and highlight the desired zoom setting:

Zoom Off — turns off the Image Zoom feature and defaults to the 1:1 format.

Zoom On 1 — optimizes the image for 4:3 format sources such as standard broadcast formats and the full screen DVD format.

Zoom On 2 — optimizes the image for 16:9 format sources such as widescreen broadcast and DVD format.

4–10

User’s Guide

Page 30
Image 30
HP f2304 High Def manual Enhancing the Video Function