HP FC1242SR, FC1142SR manual Advanced Adapter Settings

You can select the boot device as follows:

Enable Selectable Boot?	Boot WWPN/LUN list	Boot device
No	N/A (xxx appears)	BIOS configures the first disk drive it finds as
		the boot device.
Yes	Not specified	BIOS configures the first disk drive it finds that
		is LUN 0 as the boot device.
Yes	Specified	BIOS scans the specified WWPN and LUN list
		until it finds a disk drive. This drive is configured
		as the boot device.

To enable the Selectable Boot option:

1.From the Configuration Settings menu, select Adapter Settings.

2.Enable the HBA BIOS, and then press ESC to return to the Configuration Settings menu. Use the menu as follows:

•Use the arrow keys to select Selectable Boot Settings.

•Press ENTER to enable or disable (toggle) the Selectable Boot option.

3.Move to the primary location of the Selectable Boot List menu.

4.Press ENTER to view a list of accessible devices (these are the devices in the Select Fibre Channel Device menu).

5.Using the arrow keys to select the device you want to add to the Selectable Boot List menu. Press ENTER to select the device.

Repeat step 5 to specify up to three alternate boot devices.

Advanced Adapter Settings

From the Configuration Settings menu in Fast!UTIL, select Advanced Adapter Settings. Table 6 lists the default settings for the HBA.

Table 6 Advanced Adapter Settings

Setting	Options	Default
Execution Throttle	1–256	16
Luns per Target	0, 8, 16, 32, 64, 128, 256	128
Enable LIP Reset	Yes, No	No
Enable LIP Full Login	Yes, No	Yes
Enable Target Reset	Yes, No	Yes
Login Retry Count	0–255	8
Port Down Retry Count	0–255	16
Link Down Timeout	0–255	8

28 Configuring the HBAs