Set the approach for obtaining the IP address, including:
•None: The IP address of the interface is not specified, that is, the interface has no IP address.
• Static Address: Specify the IP address for the interface
IP Configuration | manually; if you select this item, you need to specify | |
both the IP address and the mask. | ||
| ||
| • DHCP: The interface obtains an IP address | |
| automatically through the DHCP protocol. | |
| • Do not change: The IP address of the interface does not | |
| change. | |
|
| |
IP Address | If you select Static Address as the approach for obtaining | |
| the IP address, you need to set the interface IP address and | |
Mask | ||
network mask. | ||
|
|
IMPORTANT:
Modification to the interface IP address will result in disconnection with the device, so make changes with caution.
Configuring NAT
Click Next on the interface IP address configuration page to enter the NAT configuration page, as shown in Figure 27.
27