HP Glisten manual Delete a Bluetooth partnership, Accept a Bluetooth partnership

NOTE: When exchanging information between two Bluetooth devices, make sure both devices have Bluetooth turned on and are in discoverable mode.

1.Press Start , tap Settings > Connections > Wireless Manager, and then tap Menu > Bluetooth Settings.

2.On the Bluetooth screen, on the Devices tab, tap Add new device. Your iPAQ searches for other devices with Bluetooth capabilities and displays them in the list.

3.Select the device from the list, and then tap Next.

4.If you want to set a passkey, which is recommended for enhanced security, enter an alphanumeric passcode between 1 and 16 characters in the Passcode box, and then tap Next. Otherwise, leave the passcode blank, and tap Next.

NOTE: For creating partnerships with cellular phones, it is mandatory that you provide a numeric passcode.

5.Enter the same passcode on the other device.

6.When the other device is paired with your phone, on the Settings screen, tap OK. If you cannot discover another device, try the following:

●Make sure Bluetooth is turned on.

●Move the devices closer to each other.

●Make sure the device you are attempting to connect is on and visible to other devices.

Delete a Bluetooth partnership

1.Press Start , tap Settings > Connections > Wireless Manager, and then tap Menu > Bluetooth Settings.

2.In the device list, tap and hold the device name, and then tap Delete.

Accept a Bluetooth partnership

1.Make sure that your iPAQ is visible and within close range (up to 10 meters, or about 30 feet) of the pairing device.

2.Press Start , tap Settings > Connections > Wireless Manager, and then tap Menu > Bluetooth Settings > Mode tab.

3.Select the Make this device visible to other devices check box, and then tap OK.

4.When prompted to accept a partnership with the device that is requesting the relationship, tap Yes.

Delete a Bluetooth partnership 117