Install synchronization software on your PC

If your computer is running Windows XP, you need to download ActiveSync at: http://www.windowsmobile.com/getstarted.

If your computer is running Windows Vista, download Windows Mobile Device Center (WMDC) at: http://www.windowsmobile.com/getstarted.

NOTE: Microsoft ActiveSync or Windows Mobile Device Center must be installed on your computer before you connect your iPAQ to the computer.

Connect your iPAQ to your PC

After installing ActiveSync or Windows Mobile Device Center, connect your iPAQ to your computer.

NOTE: If you are syncing your Microsoft Outlook email, you will be prompted for an Exchange Server address, user name, password, and domain. The Exchange Server Address will most likely be the same as your Outlook Web Access server address.

If you are using Windows Mobile Device Center, follow these steps:

1.Connect your iPAQ to the computer using the USB sync cable. Windows Mobile Device Center will launch automatically.

2.On your computer, click Set up your device.

3.On the What kind of items to you want to sync? page, select the items you want to synchronize, and then click Next.

NOTE: If you are syncing your Microsoft Outlook email, on the Type the email server information page, you will be prompted for an Exchange Server address, user name, password, and domain.

4.On the Ready to set up the Windows Mobile partnership page, click Next.

NOTE: In the Device name box, you can enter a different display name for your iPAQ.

5.Click Next, and then click Finish to complete the setup.

NOTE: After the setup is completed, synchronization takes place every time your iPAQ is connected to your computer.

If you are using ActiveSync, follow these steps:

1.Connect your iPAQ to the computer using the USB sync cable. ActiveSync will launch automatically.

2.On your computer, on the Welcome to the Pocket PC Sync Setup Wizard page, click Next.

124 Chapter 23 Synchronize your iPAQ

Page 136
Image 136
HP Glisten manual Synchronize your iPAQ