HP Glisten manual Identify the COM port for your GPS receiver

Models: Glisten

1 185
Download 185 pages 56.52 Kb
Page 134
Image 134

NOTE: GPS Data downloads new data if the last downloaded data is expired. The expiration time on the data is set to 24 hours.

Enabling the GPS Data application might involve additional data connection charges.

To enable GPS Data:

1.Press Start , tap Settings > Connections > GPS Data.

2.Select the Automatic Update check box.

3.Tap Done.

After the GPS data file has been downloaded, you might see improvements in the GPS performance as the time to find your initial position is reduced.

NOTE: To disable the GPS Data application, clear the Automatic Update checkbox.

Identify the COM port for your GPS receiver

Some GPS applications require you to specify the COM port for your GPS receiver. You can find information on the COM port by pressing Start , tap Settings > System > External GPS, and

then noting the GPS Program Port.

Troubleshoot frequent GPS signal loss and interference

To improve the satellite signal to your phone, go outdoors and start the GPS navigation software. Place your phone where there is a clear view of the sky or on the dashboard of a vehicle that does not have thermal glass windshields or windows. A direct line of sight is required between the iPAQ and the GPS satellites to access information from the satellites.

NOTE: Interference might take place close to tall buildings, large trees, and under very cloudy or overcast skies. Try to avoid these obstructions before using GPS.

Interference Type

Vehicles with thermal glass windows and windshields.

Equipment radiating Radio Frequency (RF) energy or emitting strong electromagnetic radiation. For example, microwave ovens, high-power cordless phones, CB radios, Walkie-talkies, HAM equipment, or X-ray and MRI machines.

Tall buildings, large trees, and very cloudy or overcast skies.

How to Avoid

Place the iPAQ where there is a clear view of the sky or on the dashboard of a vehicle that does not have thermal glass windows.

Move away from interference source or switch off the interference source.

Move away from interference source so there is a clear view of the sky.

122 Chapter 22 Use Google Maps TM and other GPS Applications

Page 134
Image 134
HP Glisten manual Identify the COM port for your GPS receiver, Troubleshoot frequent GPS signal loss and interference