GS 8x5.book Page 12 Friday, February 14, 2003 3:45 PM
1 Press the Power button to turn on the screen | 2 Tap System |
2Follow the instructions on the Welcome screens
Synchronization |
|
| |
Change the backlight settings | |||
Up | 1 From the Start menu, tap Settings | ||
Set | |||
|
|
3 Tap Backlight
4 Select the backlight settings
On the Battery Power tab, select when to use the backlight on battery power
On the External Power tab, select when to use the backlight on external power
On the Brightness tab, select the level of brightness for the backlight
Hint: Slide the bar to the lowest level to conserve the most power
12
Tips
I cannot see anything on the screen
1Make sure the screen is on Press the power button
2Make sure the Compaq iPAQ Pocket PC is connected to the AC adapter and the universal cradle
Plug the AC adapter into an outlet
Insert the DC plug into the DC jack on the back of the universal cradle
I cannot keep my battery charged
Always keep the Compaq iPAQ Pocket PC connected to a universal cradle or AC adapter when you are not using it
In the backlight settings slide the bar to the lowest level to conserve the most power
I do not see the charge light blinking when my Compaq iPAQ Pocket PC is connected to the universal cradle
1Make sure the universal cradle is plugged into an outlet
2Make sure the bottom of your Compaq iPAQ
Pocket PC is pushed firmly into the universal cradle
3Determine if the unit is fully charged. The charge light does not blink when the unit is fully charged.
From the Start menu, tap Settings Tap System
Tap Power