5.Change the #10 system maintenance switch setting to the On position. You can use a plastic ball-point pen to flip the system maintenance switch.

6.Replace the top cover.

Verifying the system maintenance switch setting

After you switch the setting, verify that the #10 system maintenance switch is in the On position.

NOTE: The following instructions use iLO 2. For complete information and instructions on using iLO 2, see the HP Integrated Lights-Out 2 User Guide on the HP website at http://www.hp.com/ bizsupport/TechSupport.

1.Log in to iLO 2. For instruction, see the HP Integrated Lights-Out 2 User Guide.

2.Select System Information on the left navigation bar.

10 Installing the fans