HP hw6960 manual Troubleshooting Automatic Detection, Tap Next, Tap MMS Multimedia Messages

4.Enter the following information and tap Next:

●APN: Access Point Name of the server in which you are attempting to connect.

●Name: Log on for your connection.

●Password: Password for your connection.

5.Tap Next.

6.On the next screen, choose one of the following and tap Next:

●Dynamic Internet Protocol (IP) address

●Static IP address

7.On the next screen, choose one of the following and tap Next:

●Dynamic Domain Name System (DNS) addresses

●Static DNS addresses

8.Tap OK.

Editing MMS Multimedia Messages Settings

1.Tap MMS Multimedia Messages.

2.Under Enter the MMS Center Address, enter the URL where all MMS messages are sent for delivery by your mobile phone service network.

3.Enter the following information:

●APN: Access Point Name of the MMS server being connected.

●Name: Log on name for the MMS server.

●Password: Password for the MMS server.

4.Tap OK.

5.Enter the IP address and the Port number for the WAP MMS Gateway and tap Finished.

Editing WAP Information Settings

1.Tap WAP Information.

2.Enter the IP address and the Port information for the Wireless Access Point (WAP) Gateway.

3.Tap Next.

4.Enter the IP address and the Port information for the secure WAP Gateway.

5.Tap Finish.

Troubleshooting Automatic Detection

If the automatic network detection fails, you can manually relaunch the application by tapping Start > Settings > Connections tab > Phone Data Manager > Automatic detection button on the Phone Data Manager screen.

54 Chapter 3 Connections ENWW