Figure 49 Client Console Awaiting Server Action

Configuring the Installation

To begin the installation, select a client by clicking on its icon, and then select one of the following from the Actions menu:

—Install Client->New Install... to install a new client as described in “New Installation” (page 116).

—Install Client−> Repeat Install... to use the configuration of a previously installed client as described in “Repeat an Installation” (page 145).

Figure 50 Ignite-UX Actions Menu

New Installation

The new installation procedure follows a linear path until the client installation configuration interface is displayed . At that point, the amount of configuring done is at your discretion.

116 Booting and Installing HP-UX on Clients Using the Server