IMPORTANT: Installing individual bundles instead of the complete product might cause problems for Ignite-UX if the complete product was installed previously. Refer to the Installing and Updating Ignite-UXwhite paper if you are unsure of what to install to upgrade Ignite-UX. Links to the Ignite-UX white papers are found at http://www.hp.com/go/ignite-ux-docs.

Ignite-UX Commands and Manpages

The manual pages (manpages) associated with Ignite-UX commands are in the /opt/ignite/ share/doc/ directory, are available in the HP-UX Reference at http://www.hp.com/go/ ignite-ux-docs, and are listed in Table 2 according to the directory the commands are in.

Table 2 Ignite-UX Command Manpages

Ignite-UX Command Manpages

Description

 

 

Commands in /opt/ignite/bin :

 

 

 

add_new_client(1M)

Add a client to an Ignite-UX server without requiring a client boot from

 

the Ignite-UX server.

 

 

auto_adm(1M)

Manage logical interchange format (LIF) AUTO configuration files.

auto_adm(4)

Description of auto_adm file formats

 

 

bootsys(1M)

Reboot and install systems using Ignite-UX.

 

 

check_net_recovery(1M)

Compare the files on a running system with a recovery archive made

 

with make_net_recovery.

 

 

check_tape_recovery(1M)

Compare the files on a running system with a recovery archive made

 

with make_tape_recovery.

 

 

copy_boot_tape(1M)

Replicate a PA-RISC boot tape.

 

 

ignite(5)

Configure, install, and recover HP-UX systems.

 

 

instl_adm(1M)

Manage Ignite-UX configuration files.

instl_adm(4)

Description of configuration file syntax.

 

 

instl_dbg(1M)

Parse and debug a client's configuration files.

 

 

make_boot_tape(1M)

Create a boot tape for a PA-RISC system.

 

 

make_bundles(1M)

Create Software Distributor (SD) bundles in a depot.

 

 

make_config(1M)

Generate a configuration file for software in an SD depot.

 

 

make_depots(1M)

Create SD depots from SD bundles for use by Ignite-UX.

 

 

make_ipf_tape(1M)

Create a bootable ANSI labeled tape for Itanium-based systems.

 

 

make_medialif(1M)

Create bootable Ignite-UX LIFmedia image file.

 

 

make_net_recovery(1M)

Create recovery images and store them on a network system.

 

 

make_tape_recovery(1M)

Create recovery images and store them on tape.

 

 

manage_index(1M)

Manage Ignite-UX INDEX files without directly editing them.

 

 

print_manifest(1M)

Print a system manifest.

 

 

save_config(1M)

Create hardware configuration file.

 

 

Commands in /opt/ignite/lbin:

 

 

 

ansitape(1M)

Read and write magnetic tapes conforming to the ANSI standard for

ansitape(5)

magnetic tape labelling.

Description of ANSI-labeled tape format.

 

 

 

Ignite-UX Commands and Manpages 13