Figure 96 Possible PA-RISC Installation Tape Layouts

Logical Interchange Format

The first file on a PA-RISC bootable tape is a logical interchange format (LIF) volume containing all the components required to boot from the tape. It also includes the Ignite-UX toolset and configuration information that controls how Ignite-UX will operate. Additionally, this tape file will include configuration files that describe installation functionality. See Appendix C (page 235) for information regarding the contents of a LIF volume.

For PA-RISC systems you can create a boot tape that is made up of the LIF volume only. This boot tape could then be used to boot a system, and then the software could be downloaded over the network.

The make_medialif command creates the LIF volume. A typical LIF volume would have the following contents:

•ISL

•AUTO

•INDEX

•CONFIG

•HPUX

•[WVI]INSTALL

•[WVI]INSTALLFS

•INSTCMDS

•INSTCMDSIA

•SYSCMDS

•SYSCMDSIA

•RECCMDS

•RECCMDSIA

•SCRIPTS

See Appendix C (page 235) for a full description of LIF contents.

178 Creating Your Own Boot and Installation Media