Figure 19 Ignite-UX Client Installation Configuration Tabs

The hardware path displayed in the Root Disk text box is the lunpath hardware path for HP-UX 11i v3 and later, or the legacy hardware path for HP-UX 11i v2 and earlier.

By selecting Root Disk..., the Disk Selection – Root Disk dialog box is displayed (Figure 20 (page 74)).

Figure 20 Disk Selection – Root Disk Dialog Box

The Disk Selection – Root Disk dialog box displays every path for each disk, therefore disks with multiple paths are listed multiple times. Set View By: to Disks/Paths (the default is I/O Protocol) to see what paths go to each disk. For more information on using the Disk Selection – Root Disk dialog box, see “Root disk... Button” (page 119).

74 Managing I/O for Installation and Recovery