HP LC3260N 32 inch manual Viewing questions Symptom Remedy

sa6ldtv.book Page 46 Tuesday, February 21, 2006 12:35 PM

Symptom (Continued)	Remedy
The unit cannot be operated.	■ External influences such as lightning and static electricity may cause
	improper operation. In this case, operate the unit after first turning
	on the power of the TV or unplugging the AC cord and replugging it
	in after 1 or 2 minutes.
The color is strange, faded, or	■ Adjust the picture tone.
misaligned.	■ Is the room too bright? The picture may look dark in a room that is
	too bright.
	■ Check the input signal setting.
	■ If watching a component device, make sure the red, blue, and green
	cables are fully inserted into the proper connectors on both ends.
The power suddenly turned off.	■ Is the sleep timer set?
	■ Check the power control settings.
	■ The unit’s internal temperature has increased. Remove any objects
	blocking the vent, or clean the vent.
Viewing questions
Symptom	Remedy
I get a poor picture with video signal	Check the following: Improper control setting. Local interference. Cable
input.	interconnections. Adjust picture control as needed. Try another location
	for the TV. Be sure that all connections are secure.
There is no picture or a black screen,	■ Press the Source button on the remote control and confirm the source
and I have an external device	is selected.
controlling the TV.	■ Verify that the external device power is turned on.
	■ Check to see whether the source component is connected.
	■ Check the power management function. Is it in standby mode?
	■ Connect the source to the TV. Operate the external device.
The picture, with a component input	■ Check to make sure each cable is plugged into the correct color-
source connected, is too red, blue, or	coded connector on the TV connectors and input source connectors.
green.	■ Make sure the cables are plugged in all the way.

46HP LCD HDTV User’s Guide