HP LC3260N 32 inch manual Picture quality questions Symptom Remedy

sa6ldtv.book Page 47 Tuesday, February 21, 2006 12:35 PM

Picture quality questions

Symptom	Remedy
Part of my picture is cut off, or the	Check the position adjustment settings, and adjust the screen settings
picture is not centered.	accordingly.
My picture image is too large or	Press the Aspect button on the remote control, and adjust properly.
too small.
My picture is unstable.	Verify that the external device resolution setting is correct. Adjust to the
	appropriate resolution.
There are bright spots on my screen.	In some cases, an LCD panel may have pixels that do not operate
	properly. This is common to all LCD displays used in products supplied
	by all vendors and is not specific to this product.
Remote control questions
Symptom	Remedy
The remote control does not work.	Check the following, and try the proposed solution:
	■ Batteries are inserted with polarity aligned.
	■ Make sure the remote control batteries are fresh. If they are worn
	out, replace the batteries with new batteries.
	■ Make sure the remote control is within correct operating range.
	■ Make sure the remote sensor window is not under too much light,
	direct sunlight, or strong artificial light.
	■ Make sure there are no obstacles; check that there is nothing
	between the remote control and the sensor window on the display.
	■ Make sure the remote control is aimed at your TV and is not farther
	than 16.4 feet (5 meters) away.
The remote control does not control	This is not a universal remote control. It only works with your HP
other home entertainment equipment.	television.
My universal remote control does not	When you want to program a universal remote control to operate your
find an HP TV code.	HP TV, if HP is not listed in the supported brand codes, use a Philips TV
	code. The HP remote control transmits Philips-licensed remote control
	codes.
	After programming your universal remote control with a Philips TV code,
	it can operate your HP TV functions for: Volume, mute, power, and input
	source.

Troubleshooting

Troubleshooting 47