Figure 3-11Using the Accessory Rails Feature

Removing the Monitor Pedestal Base

You can remove the monitor pedestal to mount the monitor on a wall, a swing arm, or other mounting fixture.

CAUTION Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. If your monitor has a connected audio cable, disconnect it.

1.Disconnect and remove the signal and power cables from the back of the monitor.

2.Slide the quick release latch (1) on the pedestal base to the side (either right or left).

3.Pull up on the monitor display head (2) to remove it from the base.

Figure 3-12Removing the Monitor from the Pedestal Base

12 Chapter 3 Setting Up the Monitor