NOTE The monitor does not support an On-Screen Display (OSD) menu.

HP Display LiteSaver

HP Display LiteSaver is a software application, available on the CD, that increases monitor life and saves energy. It allows you to place your monitor into its low power sleep mode at predefined times by shutting down or reducing power to most internal circuits. This helps protect the LCD panel against image retention. Image retention can occur when the monitor is left on while displaying the same image for an extended period of time, leaving a shadow of the image on the screen.

Installing the HP Display LiteSaver Software

1.Insert the CD in the computer CD-ROM Drive. The CD menu displays.

2.Select Install HP Display LiteSaver Software.

3.After installing the software, click the HP Display LiteSaver icon in the Windows system tray or right-click the icon and select Configure... from the pop-up menu.

4.Select the following options to configure the HP Display LiteSaver features:

Table 4-2HP Display LiteSaver Configuration Options

Select This Option

To Do This

 

 

Enable Display LiteSaver

Enables the HP Display LiteSaver functions; deselect to disable the HP Display LiteSaver.

 

 

Display Off

Sets the time when the monitor automatically turns off. This does not affect screen saver

 

operation, which has priority over the HP Display LiteSaver.

 

 

Display On

Sets the time when the monitor automatically turns on. This does not affect screen saver

 

operation, which has priority over the HP Display LiteSaver.

 

 

Activity Extension

Sets the time in minutes before the monitor turns off if there is any keyboard or mouse activity

 

after the Display Off time is reached. If the keyboard or mouse is used, then HP Display LiteSaver

 

waits until the set amount of time before turning the display off again. Set to 0 to disable. If

 

 

18 Chapter 4 Operating the Monitor