Macintosh

Macintosh printing-system software

The HP LaserJet M1120 MFP Series printing system for Macintosh is composed of the Printer Setup Utility (Mac OS X V10.3, v10.4 and later) and HP-created printer dialog extension (PDE) files. The driver uses these files to determine the features and postscript commands that the device supports. The following components are installed:

●The HP LaserJet Installer for Mac OS X V10.3, v10.4 and later

●LIBRARY/PRINTERS/PPDS/CONTENTS/RESOURCES/LANGUAGE.LPROJ (for Mac OS X)

NOTE: Installation CD version 1.0 does not support the Intel-based Macintosh operating system.

Topics:

●Additional software

●System requirements

●Availability

Additional software

The following software utilities also install with the HP LaserJet M1120 MFP Series software for Macintosh systems.

●HP Director. Use the HP Director to gain access to product-specific software, default settings, status, and onscreen Help. By using the HP Director, you can scan various types of originals, make copies, configure and maintain the device, and see user documentation.

●HP Scan. Use the HP Scan function to select scan options and then store the image to a file. Open the scanning software from the HP LaserJet Director.

●HP Setup Utility. Use the HP Setup Utility to configure and manage the HP printers installed on your system.

System requirements

●G3, G4, or G5 PowerPC processor

●Mac OS X V10.3 and later, with 128 MB RAM and 50 MB of available hard-disk space

●CD-ROM drive or Internet connection

Availability

This document provides information about the availability of the HP LaserJet M1120 MFP Series printing-system software and related software and firmware. Printing-system software on a CD is available from HP fulfillment centers.

Topics:

●Software on the Web

●In-boxprinting-system software CDs

114 Chapter 5 Macintosh software and utilities

ENWW