Network connection
The product can connect to wireless networks.
Install the product on a wireless network with the software CD
1.Insert the software CD into the computer CD tray.
If the installation program does not start automatically, browse the CD contents and run the SETUP.EXE file.
2.Follow the onscreen instructions to complete the product installation.
3.When the installation is complete, if you want to verify that the product has a network IP address, print a configuration page.
a.On the product control panel, press the Setup 
button
b.Use the arrow buttons to select the Reports menu, and then press the OK button.
c.Use the arrow buttons to select the Config report option, and then press the OK button.
Perform a peer-to-peer (ad-hoc) wireless installation
Perform a wireless install to a computer through a
1.Use the following procedure to restore the default wireless settings.
NOTE: If an error occurs, uninstall the product, and then
Restore the default wireless settings
a.Press the Setup 
button to open the menus.
b.Use the right arrow 
or left arrow 
button to navigate to the Network config. menu. Press the OK button to select the menu.
c.Use the right arrow 
or left arrow 
button to navigate to Restore Defaults. Press the OK button to select this item and restore the default wireless settings.
2.Print a configuration page, and find the network name (SSID) in the Network Information section.
a.On the product control panel, press the Setup 
button
b.Use the arrow buttons to select the Reports menu, and then press the OK button.
c.Use the arrow buttons to select the Config report option, and then press the OK button.
3.Refresh the computer wireless network connection list, and then click the product network name (SSID) and connect to it.
8 | Chapter 3 Connect the product | ENWW |
