HP M1132, M1217nfw, M1136 manual Solve connectivity problems

The product cannot connect to the wireless network.

Cause	Solution
The product wireless settings and the network settings do not	You might need to configure the product network settings
match.	manually. Verify that you know the following network settings:
	●	Communication mode
	●	Network name (SSID)
	●	Channel (ad-hoc networks only)
	●	Authentication type
	Use the Wireless Configuration utility to configure the product
	to print on wireless network.
	If the error persists, uninstall the product, and then re-run the
	installer program. When prompted for network settings,
	provide the settings, and then continue the installation.
The wireless router or access point is configured with a media	Configure the wireless router or access point so that the list of
access control (MAC) filter that is denying the product access	accepted MAC addresses includes the product hardware
to the network.	address. Refer to the device owners manual for help.
The wireless connection is sometimes disabled.
Cause	Solution

The product environment might be affecting wireless communication. The following situations can affect wireless communication:

●A concrete or metal framed wall stands between the product and the wireless router or access point.

●Televisions, computer appliances, microwave ovens, intercoms, mobile/cellular phones, battery chargers, and AC power adapters are installed close to the network.

●A broadcast station or high-tension wire is located close to the network.

●A fluorescent light that is near the network is being switched on or off.

Move the product to a location where it can receive a steady signal from the wireless router or access point. Or you might need to move the wireless router or access point.

ENWW Solve connectivity problems 15