HP M425, M525 manual Setting the flash, Using the shooting modes, Red eye

Models: M425 M525

1 46
Download 46 pages 50.63 Kb
Page 15
Image 15

Note 2 Digital zoom reduces the resolution of an image, so your picture may be more grainy than the same picture taken with optical zoom. When you need higher quality, limit the use of digital zoom.

Setting the flash

To select a flash setting, press , use to highlight the desired flash mode, then press .

Auto Flash (Default)—The camera uses the flash if necessary.

Red-Eye—The camera uses the flash with red-eye reduction, if necessary, to minimize the possibility of human eyes appearing red in the final image. For information about red-eye, see Red eye on page 15.

Flash On—The camera always uses flash. If the light is behind your subject, use this setting to increase the light on the front of your subject.

Flash Off—The camera does not use flash. Use this setting to capture poorly lit subjects beyond the flash range or to capture scenes with the existing light.

The Flash setting remains in effect until it is changed again, or you turn off the camera.

Note The flash is not available in Burst, Fast Shot, Landscape, or Sunset shooting modes, nor while recording video clips. In Night Portrait shooting mode, the flash is set to Red-Eye.

Red eye

The red-eye phenomenon is caused when light from the flash reflects off the subjects' eyes, which can make human eyes appear red in the captured image. Using Red- Eye causes the camera to flash quickly up to three times to shrink the subject's pupils (reducing the effect of the red-eye phenomenon) before using the main flash and capturing the image. Since it takes longer to take a picture using this setting, make sure your subjects wait for the additional flashes.

Using the shooting modes

Shooting modes are predefined settings for everyday situations. They are optimized for particular types of scenes or shooting situations.

To select a shooting mode, press while in Live View, use to highlight a shooting mode, then press .

Auto Mode (Default)—For taking good shots quickly, when you do not have time to select a special shooting mode.

Self-Timer—For capturing images or recording video after a 10-second delay (see Using the Self-Timer mode on page 16).

Fast Shot—For taking images more quickly than in Auto mode in bright light conditions when the subject is a moderate to long distance away.

HP Photosmart M425/M525 Digital Camera

15

Page 15
Image 15
HP M425, M525 manual Setting the flash, Using the shooting modes, Red eye