How to create a Shared Folder in user-based mode

To access the Shared Folder screen:

Double-click the HP Media Vault icon on your desktop.

Click Customize your HP Media Vault’s setting.

If the Welcome Screen appears, click Configure Device.

Click the Shared Folders tab.

To create a Shared Folder in user-based mode:

1.Click Create New Shared Folder.

2.In the New Shared Folder Name box, enter a descriptive name.

3.From the Volume drop-down list, choose the disk volume on which the new Shared Folder will reside. (For more information on disk volumes, see Hard drive settings.)

Before changing the default access mode from Network Computers, see Supported Protocols at How to use the Shared Folders screen.

4.Complete one or more of the following steps:

Click Network Computers (CIFS). Select either vault automatically defaults to Full Access.

Click Network Computers (NFS). Select either vault automatically defaults to Full Access.

Click Web Browser. Select either Read-only

Click FTP. Select either Read-onlyaccess or

Read-onlyaccess or Full Access. Your media

Read-onlyaccess or Full Access. Your media

access or Full Access. Full Access.

The screen’s lower section contains an information box that lists your currently defined users and their privilege levels. Each defined user must have a privilege level for every Shared Folder you create. To assign privilege levels for each user:

5.Select a user from the Select Username drop-down list.

6.Select a privilege level from the Select Privilege Level drop-down list.

7.Click Add.

8.Repeat steps 5 through 7 for each defined user.

9.Click Accept or Cancel. (If you select Cancel, everything that you entered on this screen will not be accepted.)