Click FTP. Select either Read-onlyaccess or Full Access.

2.If you’re finished modifying Shared Folders, click Accept or Cancel. Otherwise continue with the next section. (If you click Cancel, your changes will not be accepted.)

To modify a user’s access privileges:

1.Select a user from the Select Username drop-down list.

2.Select a privilege level from the Select Privilege Level drop-down list.

3.Click Add.

4.Repeat steps 1 through 3 for each username and privilege level you want to modify.

5.If you’re finished modifying Shared Folders, click Accept or Cancel. Otherwise continue with the next section. (If you click Cancel, your changes will not be accepted.)

To create new users

1.Click Create New User

When you click Create New User, you are taken to the User Settings page.

2.Enter the username in the User’s Name dialog box.

3.Enter a password name in the Password dialog box. All users must have a password.

4.In Confirm Password, re-enter the password to confirm it was entered correctly. Each defined user must have a privilege level for every Shared Folder on your HP Media Vault.

To assign Shared Folder privilege levels for the new user:

1.Select a Shared Folder from the Select Shared Folder drop-down list.

2.Select a privilege level from the Select Privilege Level drop-down list.

3.Click the Add button.

4.Repeat steps 4 through 6 for each Shared Folder on your media vault.

5.Click Accept or Cancel. (If you click Cancel, your changes will not be accepted.)