How to create a mirror
This option creates a mirror of an existing volume or source volume on the HP Media Vault. A volume is a portion of one or more hard disks configured to store data. A mirror duplicates the source volume on another hard disk. For more information on mirroring, see Understanding disk mirrors and concatenated disks.
When you save files to a mirrored volume, your files are saved to both hard disks. The end result is that half the total amount of space is available to store your files. For example, two 200GB drives mirrored together result in a mirrored volume of 200GB, not 400GB.
Note: When creating a mirror, you must use a blank hard disk or unallocated space on a hard disk that is the same size or larger than the source volume you want to mirror. If any there is not enough unallocated space on the expansion disk, you can do one of the following: erase the disk, or resize or delete one or more volumes on the disk. For information on how to do these procedures, see Erase a disk, Modify a volume, and Delete a volume.
Data on a mirror volume is safe unless both disks fail at the same time. If one hard disk fails, the
media vault will administer a warning. The failed hard disk should be replaced immediately.
To access the Disk Settings screen:
Click Customize your HP Media Vault’s settings.
If the Welcome Screen appears, click Configure Device.
Click the Disk Settings tab.
To create a mirror:
1.Select the volume you want to mirror by clicking the Select a Volume
2.Click Create a Mirror.
Note: If the expansion disk is not blank or does not have enough unallocated space, the Create Mirror button is dimmed. For information on how to increase unallocated space, see the Note above.
A screen opens displaying the volume you have chosen. For example: You have chosen Volume1 to mirror.
3.In the Disk Assignment
4.Click Accept or Cancel. If you click Cancel, a mirror will not be created.
This process may take several hours before the volume is completely mirrored. You can continue to use the media vault during this time.
The media vault does not automatically show the progress of the mirroring. To view the progress,