©2014 Hewlett-Packard Development Company, L.P. www.hp.com

Reproduction, adaptation or translation without prior written permission is prohibited, except as allowed under the copyright laws.

The information contained herein is subject to change without notice.

The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an

additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein.

FCC Regulations

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio-frequency energy. If this equipment is not installed and used in accordance with the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase separation between equipment and receiver.

Connect equipment to an outlet on a circuit different from that to which the receiver is located.

Consult your dealer or an experienced radio/TV technician.

Any changes or modifications to the product that are not expressly approved by HP could void the user’s authority to operate this equipment. Use of a shielded interface cable is required to comply with the Class B limits of Part 15 of FCC rules. For more regulatory information, see the electronic user guide. Hewlett-Packard shall not be liable for any direct, indirect, incidental, consequential, or other damage alleged in connection with the furnishing or use of this information.

Trademark Credits

Windows® is a U.S. registered trademark of Microsoft Corporation.

La reproduction, l'adaptation ou la traduction de ce document sans l'autorisation écrite préalable de Hewlett-Packard est interdite, sauf dans des conditions conformes aux lois relatives au copyright.

Les informations contenues dans ce document peuvent être modifiées sans préavis.

Les seules garanties pour les produits et services HP sont décrites dans les déclarations de garantie expresse qui accompagnent ces produits et services. Les informations contenues dans ce document ne constituent en aucun cas une garantie supplémentaire. HP n'est pas responsable des erreurs d'ordre technique ou éditorial ou des omissions contenues dans ce document.

Réglementations de la FCC

Les tests effectués sur cet équipement ont déterminé qu’il est conforme aux prescriptions des unités numériques de classe B, telles que spécifiées à l’article 15 des normes de la FCC (Commission fédérale des communications). Ces limites sont destinées à assurer une protection suffisante contre les interférences produites dans une installation résidentielle. Cet équipement génère, utilise et peut émettre de l’énergie sous forme de fréquences radio. Si ce matériel n'est pas installé et utilisé conformément aux instructions, il peut causer des interférences nuisibles aux communications radio. Aucune garantie n'est néanmoins fournie quant à l'apparition d'interférences dans une installation particulière. Si cet appareil provoque des interférences nuisibles

(qui peuvent être déterminées en éteignant et rallumant l'appareil)

àdes communications radio ou télévision, corrigez ce problème en appliquant une ou plusieurs des mesures suivantes :

Réorientez ou déplacez l’antenne de réception.

Augmentez la distance séparant l’équipement du récepteur.

Connectez l’équipement à une prise située sur un circuit différent de celui sur lequel se trouve le récepteur.

Consultez votre revendeur ou un technicien radio/télévision expérimenté.

Toute modification apportée au produit sans le consentement de HP peut se traduire par la révocation du droit d’exploitation de l’équipement dont jouit l’utilisateur. Un câble d’interface blindé est requis afin de satisfaire aux stipulations de l’article 15 des réglementations de la

FCC sur les appareils de classe B. Pour de plus amples informations sur les réglementations, reportez-vous au Guide de l'utilisateur au format électronique. Hewlett-Packard ne sera en aucun cas tenu responsable des dommages directs, indirects, accessoires, consécutifs ou autres pouvant résulter de la mise à disposition de ces informations ou de leur utilisation.

Crédits concernant les marques

Windows® est une marque déposée de Microsoft Corporation aux États-Unis.

20

Page 20
Image 20
HP MFP M225dn manual Crédits concernant les marques

MFP M225dn specifications

The HP MFP M225dn and MFP M225dw are compact multifunction printers designed for small to medium-sized businesses looking for efficient printing, copying, and scanning solutions. These models stand out for their robust features and reliable performance, making them ideal for enhancing productivity in any office environment.

A notable feature of the MFP M225dn and MFP M225dw is their print speed, capable of delivering up to 26 pages per minute. This swift performance saves valuable time, especially in busy office settings. Both models come with automatic duplex printing, enabling users to print on both sides of the paper without the need to manually flip the page. This not only reduces paper usage but also contributes to sustainable printing practices.

The MFP M225dn is equipped with a built-in network port, allowing users to connect the printer directly to a wired network. In contrast, the MFP M225dw offers additional flexibility with built-in wireless capabilities, making it easy to print from various devices, including smartphones and tablets. This wireless technology is complemented by features such as Wi-Fi Direct, which allows for seamless printing without the need for a network.

Both models incorporate HP's JetIntelligence technology, which ensures that they produce high-quality prints with sharp text and vivid graphics. This technology also enhances efficiency, allowing these printers to handle higher volumes while using less energy. The HP MFP M225dn and MFP M225dw utilize high-capacity toner cartridges, leading to a lower cost per page, making these printers an economical choice for businesses.

The user-friendly control panel on both printers features a color LCD display, streamlining navigation through various functions such as copying and scanning. With a flatbed scanner and an automatic document feeder, users can easily digitize documents quickly, enhancing workflows and organization.

In summary, the HP MFP M225dn and MFP M225dw are designed to meet the demands of busy work environments. Their combination of speed, reliability, and versatile connectivity options, alongside advanced printing technologies, makes them valuable assets for any office aiming to improve its productivity.