QuickSpecs

HP ProLiant ML370 Generation 6

Standard Features

Rack Airflow

Rack 10000 G2 series Cabinets

Requirements

The increasing power of new high-performance processor technology requires increased cooling

 

efficiency for rack-mounted servers. The 10000 Series Racks provide enhanced airflow for

 

maximum cooling, allowing these racks to be fully loaded with servers using the latest processors.

 

CAUTION: If a third-party rack is used, observe the following additional requirements to ensure

 

adequate airflow and to prevent damage to the equipment:

 

Front and rear doors: If your 42U server rack includes closing front and rear doors, you must

 

allow 830 square inches (5,350 sq cm) of hole evenly distributed from top to bottom to

 

permit adequate airflow (equivalent to the required 64 percent open area for ventilation).

 

Side: The clearance between the installed rack component and the side panels of the rack

 

must be a minimum of 2.75 inches (7 cm).

 

CAUTION: Always use blanking panels to fill all remaining empty front panel U-spaces in the rack.

 

This arrangement ensures proper airflow. Using a rack without blanking panels results in improper

 

cooling that can lead to thermal damage.

 

NOTE: For additional information, refer to the Setup and Installation Guide or the Documentation

 

CD provided with the server, or to the server documentation located in the Support section at the

 

following URL: www.hp.com/servers/ml370-g6.

 

 

 

Rack Kit

Quick deploy rail system provides tool-free support for racks with square or round mounting holes

 

(including Compaq/HP 7000, 9000, 10000 G2 and HP series), with an adjustment range of 24" -

 

36". The ambidextrous cable management arm can be mounted on either the left or right side for

 

improved cable management.

 

 

 

Telco Rack Support

Support for all 2-post Telco racks requires the use of the standard rack kit and an additional option

 

kit from Rack Solutions at: www.hp.com/go/rackandpower.

 

 

 

Factory Express

HP Factory Express offers configuration, customization, integration and deployment services for

Portfolio for Servers

HP servers and storage products. Customers can choose how their factory solutions are built,

and Storage

tested, integrated, shipped and deployed.

 

Factory Express offers service packages for simple configuration, racking, installation, complex

 

configuration and design services as well as individual factory services, such as image loading,

 

asset tagging, and custom packaging. HP products supported through Factory Express include a

 

wide array of servers and storage: HP Integrity, HP ProLiant, HP ProLiant Server Blades, HP

 

BladeSystem, HP 9000 servers as well as the MSAxxxx, VA7xxx, EVA, XP, rackable tape libraries

 

and configurable network switches.

 

For more information on Factory Express services for your specific server model please contact

 

your sales representative or go to: http://www.hp.com/go/factory-express.

 

 

 

HP Enterprise

The HP eConfigure Enterprise Configurator now provides factory default racking for our HP

Configurator

hardware portfolio. This approach is aligned with our strategic direction to meet the needs and

 

expectations of our valued customers. If you require "custom" rack configuration, please contact

 

HP's Customer Business Center or an Authorized Partner for assistance.

 

http://www.hp.com/products/configurator

 

 

 

DA - 13242 Worldwide QuickSpecs — Version 21 — 3-29-2010

Page 12