QuickSpecs

HP ProLiant ML370 Generation 6

Technical Specifications

 

 

is 10°C/hr (18°F/hr). The upper limit may be

 

 

limited by the type and number of options

 

 

installed.

 

 

System performance may be reduced if

 

 

operating with a fan fault or above 30°C

 

 

(86°F).

 

Non-operating

-30° to 60°C (-22° to 140°F). Maximum rate of

 

 

change is 20°C/hr (36°F/hr).

Relative Humidity

Operating

10 to 90% relative humidity (Rh), 28°C

(non-condensing)

 

(82.4°F) maximum wet bulb temperature, non-

 

 

condensing.

 

Non-operating

10 to 95% relative humidity (Rh), 38.7°C

 

 

(101.7°F) maximum wet bulb temperature,

 

 

non-condensing.

Altitude

Operating

3048 m (10,000 ft). This value may be limited

 

 

by the type and number of options installed.

 

 

Maximum allowable altitude change rate is

 

 

457 m/min (1500 ft/min).

 

Non-operating

9144 m (30,000 ft). Maximum allowable

 

 

altitude change rate is 457 m/min (1500

 

 

ft/min).

Acoustic Noise

Listed are the declared A-Weighted sound power levels (LWAd) and

 

declared average bystander position A-Weighted sound pressure levels

 

(LpAm) when the product is operating in a 23°C ambient environment.

 

Noise emissions were measured in accordance with ISO 7779 (ECMA

 

74) and declared in accordance with ISO 9296 (ECMA 109).

 

Idle

 

 

L WAd

4.6 B for 1P Non-Redundant; 4.9 B for 2P

 

 

Redundant

 

L pAm

28 dB for 1P Non-Redundant; 31 dB for 2P

 

 

Redundant

 

Operating

 

 

L WAd

4.7 B for 1P Non-Redundant; 5.0 B for 2P

 

 

Redundant

 

L pAm

29 dB for 1P Non-Redundant; 32 dB for 2P

 

 

Redundant

 

NOTE: The Listed sound levels apply to standard shipping

 

configurations. Additional options may result in increased sound levels.

Emissions

FCC Rating

Class B

Classification (EMC)

Normative Standards

CISPR 22; EN55022; EN55024; FCC CFR 47,

 

 

Pt 15; ICES-003; CNS13438; GB9254;

 

 

K22;K24; EN 61000-3-2; EN 61000-3-3; EN

 

 

60950-1; IEC 60950-1

NOTE: Product conformance to cited product specifications is based on sample (type) testing, evaluation, or assessment. This product or family of products is eligible to bear the appropriate compliance logos and statements.

DA - 13242 Worldwide QuickSpecs — Version 21 — 3-29-2010

Page 48