Connecting the Projector to a
Portable Computer1.Connect one end of the projector signal cable to the projector and the other end to the VGA connector 1B or the DFP connector 1A on the portable computer and tighten the screws. Use the VGA cable OR the DFP cable; do not connect both cables.
✎Be sure the signal cable aligns with the connector. Do not force the cable onto the connector or you may damage the signal cable or the projector.
2.Connect one end of the power cord 2 into the back of the projector, and the other end to an electrical outlet that is easily accessible and close to the projector.
✎For more information on setting up the projector with a portable computer, see the white paper “Compaq MP1600 Microportable Projector and the Armada Graphics/Video Capabilities” included on the