Powering Off the Projector
1.Press the Standby button to turn off the projector lamp.
The message “Going to Standby” displays and the LED on the Standby button blinks amber.
IMPORTANT: Allow the projector to cool down for about five to ten minutes before turning it off.
2.Turn off the Main power switch on the back of the projector.
3.Disconnect the power cord from the electrical outlet and the projector.
CAUTION: If the LEDs on all five buttons rapidly flash amber, this indicates that the lamp has overheated and the projector has automatically shut down. Remove any obstruction that may prevent proper ventilation to the projector, and wait five to ten minutes to allow the projector to cool down before powering it on again.
MP1600 Microportable Projector