To connect SCART output (RGB)

Before connections: An exclusive SCART adapter (ADP-SC1) and a commercially available SCART cable are required for this connection.

NOTE:

•Audio signal is not available for this connection.

•The RGB IN 2 connector does not support Plug & Play.

Video equipment

Projector

such as DVD player

 

 

RGB 1 IN

 

To RGB IN 1

Commercially available Female

ADP-SC1

SCART cable

 

1.Turn off the power to the projector and your video equipment.

2.Use the NEC ADP-SC1 SCART adapter and a commercially avail- able SCART cable to connect the RGB 1 input of your projector and a SCART output (RGB) of your video equipment.

3.Turn on the power to the projector and your video equipment.

4.Use the RGB 1 button on the remote control to select the RGB 1 input.

5.Press the MENU button on the remote control to display the menu.

6.From the Advanced menu, select [Projector Options] → [Setup] → [Page 3] → [Signal Select RGB1] → [Scart].

SCART is a standard European audio-visual connector for TVs, VCRs and DVD players. It is also referred to as Euro-connector.

NOTE: The ADP-SC1 SCART adapter is obtainable from your NEC dealer in Eu- rope. Contact your NEC dealer in Europe for more information.

Connecting an External Monitor

RGB OUT

LINE IN

PHONE

You can connect a separate, external monitor to your projector to simultaneously view on a monitor the RGB analog image you're projecting. To do so:

1.Turn off the power to your projector, monitor and computer.

2.Use a 15-pin cable to connect your monitor to the RGB OUT (Mini D- Sub 15 pin) connector on your projector.

3.Turn on the projector, monitor and the computer.

NOTE:

•The RGB OUT connector outputs RGB signal during idle mode (See page E- 47). When the projector goes into idle mode, the image on an external moni- tor disappears for a moment. Note that the RGB OUT connector will not out- put RGB signal during Standby mode.

•When the projector is in the Idle mode, the image may not be correctly dis- played while the cooling fans are running immediately after turning on or off the power. Note that the RGB OUT connector will not output RGB signal dur- ing Standby mode.

•Daisy chain connection is not possible.

E-15