Connecting Your DVD Player

RGB2IN

Optional 15-pin-to-RCA (female)￿3 cable (ADP-CV1)

RGB1IN

RCA(female)-to-BNC(male) adapter (not supplied)

Component video RCA￿3 cable (not supplied)

Audio Equipment

DVD player

 

 

 

 

 

 

 

AUDIO OUT

 

Component

 

 

 

 

 

 

 

 

 

L R

Y Cb Cr

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can connect your projector to a DVD player with component output or Video output. To do so, simply:

1.Turn off the power to your projector and DVD player.

2.If your DVD player has the component video (Y,Cb,Cr) output, use a commercially available component video cable (RCAX3) and the op- tional 15-pin-to-RCA (female)￿3 cable to connect your DVD player to the RGB IN1 or IN2 connector on the projector.

AUDIO IN

L R

Audio cable (not supplied)

For a DVD player without component video (Y,Cb,Cr) output, use common RCA cables (not provided) to connect a composite VIDEO output of the DVD player to the Video Input of the projector.

3. Turn on the projector and DVD player.

NOTE: Refer to your DVD player's owner's manual for more information about your DVD player's video output requirements,

E-16