HP MT1065 Connecting Your VCR or Laser Disc Player, Connecting the Supplied Power Cable

Connecting Your VCR or Laser Disc Player

S-VIDEOIN

S-video cable (not supplied)

VCR/ Laser disc player

AUDIO OUT

L R

VIDEOIN

Video cable (not supplied)

Audio equipment

AUDIO IN

L R

VIDEO OUT

S-VIDEO OUT

Audio cable (not supplied)

Use common RCA cables (not provided) to connect your VCR, laser disc player or document camera to your projector.

To make these connections, simply:

1.Turn off the power to the projector and VCR, laser disc player or document camera.

2.Connect one end of your RCA cable to the video output connector on the back of your VCR or laser disc player, connect the other end to the Video input on your projector. Use an audio cable (not supplied) to connect the audio from your VCR or laser disc player to your audio equipment (if your VCR or laser disc player has this capability). Be careful to keep your right and left channel connections correct for stereo sound.

3.Turn on the projector and the VCR or laser disc player.

NOTE: Refer to your VCR or laser disc player owner's manual for more information about your equipment's video output requirements.

NOTE: An image may not be displayed correctly when a Video or S-Video source is played back in fast-forward or fast-rewind via a scan converter.

Connecting the Supplied Power Cable

Connect the supplied power cable to the projector.

First connect the supplied power cable's three-pin plug to the AC IN of the projector, and then connect the other plug of the supplied power cable in the wall outlet.

	AUDIO
DVI IN	B/Cb
	G/Y
AUDIO
RGB2 IN
RGB1 IN
	AUDIO
	R
	L/MONO
	AUDIO
S-VIDEO IN

1 2

		REMOTE
		PC CONTROL
USB(MOUS	E/HUB)	R
		L/MONO
		AUDIO
	V
H		AUDIO OUT
		AC IN
RGB OUT
		AUDIO
		R
	L/MONO
		AUDIO
VIDEO IN

E-17