Using a USB Mouse

Using the USB HUB Function

Using a USB mouse gives you a smooth operation. A commercially available USB mouse is required.

USB(MOUSE/HUB)

When using the projector with a PC via the supplied USB cable, both the USB port(type A) on the projector can be connected to a USB-supported scanner or other USB-supported device. (USB Hub Function)

Example: When connecting a PC and a scanner to each USB port respectively

USB(MOUSE/HUB) USB(PC)

NOTE:

•The MT1065 comes with a USB mouse.

•There may be some brands of USB mouse that the projector does not sup- port.

Operate the Menus using the USB mouse

Mouse Cursor

When connecting a USB mouse to the projector, you get a mouse cursor on the screen.

Unless you use your USB mouse within 10 seconds, the mouse cursor disappears.

Menu Display

Clicking with a mouse button displays the menu.

Clicking  displays the pull-down menu. To close the menu, click anywhere in the background.

Adjusting and Setting Display

You can select a menu item and click with a mouse button to make adjustments and setting.

Examples

Click (or press and hold) the mouse button  or  to adjust the bright- ness. Or click and drag the mouse button on the slide bar horizontally to adjust it.

To save the adjustments, click . The display is closed. If you click anywhere in the background while displaying adjustment and setting menu or dialog box, you will get the main menu at the clicking point.

Using the middle button on the mouse

The projector supports the middle button on your mouse. With the middle button you can use a scroll bar when it is available or click the middle button to display or hide the Chalkboard toolbar.

An example of how a scanned image is projected

1.Install the Dynamic Image Utility on your PC.

NOTE: The Dynamic Image Utility is contained on the supplied CD-ROM. See the supplied NEC Software Utility Installation Guide for the installation proce- dure.

2.Use your scanner to scan an image.

NOTE: A scanner driver must be installed on your PC before use.

3.Load the scanned image on your PC using the Dynamic Image Util- ity.

4.Transmit the scanned image from your PC to the projector via the USB cable and project the image on the screen.

NOTE:

•The USB HUB function is effective only when “Auto” is selected in Operation Mode Select.

•The PCs using the USB Host Controller may not be available.

•When connecting a USB hub to the USB port (type B) on the projector, be sure to use a USB hub capable of supplying 500mA per port of downstream current.

E-28