Fire and Shock Precautions

1.Ensure that there is sufficient ventilation and that vents are unob- structed to prevent the build-up of heat inside your projector. Allow at least 4 inches (10 cm) of space between your projector and a wall.

2.Prevent foreign objects such as paper clips and bits of paper from falling into your projector.

Do not attempt to retrieve any objects that might fall into your projec- tor. Do not insert any metal objects such as a wire or screwdriver into your projector. If something should fall into your projector, disconnect it immediately and have the object removed by a qualified NEC service personnel.

3.Do not place any liquids on top of your projector.

4.Do not look into the lens while the projector is on. Serious damage to your eyes could result.

5.Keep any items such as magnifying glass out of the light path of the projector. The light being projected from the lens is extensive, there- fore any kind of abnormal objects that can redirect light coming out of the lens, can cause unpredictable outcome such as fire or injury to the eyes.

6.Do not cover the lens with the supplied lens cap or equivalent while the projector is on. Doing so can lead to melting of the cap and possibly burning your hands due to the heat emitted from the light output.

7.The projector is designed to operate on a power supply of 100-240 V 50/60 Hz AC. Ensure that your power supply fits this requirement before attempting to use your projector.

8.Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or fire.

9.If the projector is not to be used for an extended period of time, disconnect the plug from the power outlet.

10.Do not touch the power plug during a thunderstorm. Doing so can cause electrical shock or fire.

CAUTION

1.

Do not try to touch the ventilation outlet on the front as it can be-

 

come heated while the projector is turned on.

2.

Do no use the tilt-foot for purposes other than originally intended.

 

Misuses such as gripping the tilt-foot or hanging on the wall can

 

cause damage to the projector.

•Allow a minimum of 90 seconds to elapse after turning off the pro- jector. Then turn off the main power switch, disconnect the power cable and allow 60 minutes to cool the projector before replacing the lamp.

What's in the Box?

Make sure your box contains everything listed. If any pieces are miss- ing, contact your dealer.

Please save the original box and packing materials if you ever need to ship your MT1075/MT1065 Projector.

Lens cap

 

 

 

 

 

 

 

Projector

Remote Control Cable

 

 

 

 

 

 

 

 

(7N520019)

 

 

 

 

 

 

SELECT

 

 

 

 

 

 

 

 

PJ

 

 

 

 

ASPECT

FREEZE

 

 

 

 

 

 

HELP

 

3D

 

 

 

VOLUME

PO

INTER

 

REFORM

 

 

MAGNIFY

PIC-MUTE

 

 

 

 

SLIDE

 

 

 

ZOOM

 

 

 

 

 

 

 

FOCUS

 

 

 

 

 

 

 

 

FO

LDER

 

 

 

 

 

 

 

 

 

 

 

 

 

SLIDE

 

 

 

 

 

 

 

 

LIST

 

 

 

 

 

 

 

 

Remote control

Batteries

String (24C05051) and

(7N900363)

 

rivet (24C04531)

Power cable

USB cable

RGB signal cable

(US: 7N080204)

(7N520013)

(7N520032)

(EU: 7N080008)

 

 

3.

Enable High-Speed Fan mode if you continue to use the projector

 

for consecutive days. (From the Advanced menu, select [Projector

 

Options] → [Setup] → [Page 4] → [High Speed Fan Mode].)

4.

Do not unplug the power cable from the wall outlet under any one of

 

the following circumstances.

 

Doing so can cause damage to the projector:

 

* While the Hour Glass icon appears.

 

* While the message "Please wait a moment." appears.This mes-

 

sage will be displayed after the projector is turned off.

User's Manual

 

 

Quick

Connect

Guide

 

Software NEC

Installation

 

Utility

 

Guide

CD-ROM

Projector User Supportware (7N950432)

 

* While the cooling fans are running. (The cooling fans continue to

 

work for 90 seconds after the projector is turned off).

5.

Do not eject the PC card or LAN card while its data is being accessed.

 

Doing so can damage your PC card or LAN card data.

6.

Do not hold the lens part with your fingers. Doing so could pinch

 

fingers or hands causing injury.

Lamp Replacement

•To replace the lamp, follow all instructions provided on page E-55.

•Be sure to replace the lamp when the message "The lamp has reached the end of its usable life. Please replace the lamp." appears. If you continue to use the lamp after the lamp has reached the end of its usable life, the lamp bulb may shatter, and pieces of glass may be scattered in the lamp case. Do not touch them as the pieces of glass may cause injury.

If this happens, contact your NEC dealer for lamp replacement.

For North America only

MT1065 only

Registration card

USB mouse (7N960151)

Limited warranty

 

For Europe only

 

Guarantee policy

 

E-3