HP NC320T manual Gigabit over Copper Internal Straight-Through Pinouts

Specifications

Gigabit over Copper Internal Straight-Through Pinouts

Unlike connections in which the crossover function is implemented internally at the hub or switch, the NC320T PCI Express Gigabit Server Adapter provides its own automatic crossover function. This means you can wire twisted-pair media straight-through for adapter- to-hub, adapter-to-switch, or adapter-to-adapter connections using the pinouts shown in Table C-4.

NOTE: To operate at Gigabit speeds, all four pairs of wires must be terminated within the RJ-45 connector.

Table C-4: Gigabit over Copper Pinouts Using Internal Crossover

Pin	Function	Color Match	Function	Pin
1	BI_DA+	White/Orange	BI_DA+	1
2	BI_DA-	Orange/White	BI_DA-	2
3	BI_DB+	White/Green	BI_DB+	3
4	BI_DC+	Blue/White	BI_DC+	4
5	BI_DC-	White/Blue	BI_DC-	5
6	BI_DB-	Green/White	BI_DB-	6
7	BI_DD+	White/Brown	BI_DD+	7
8	BI_DD-	Brown/White	BI_DD-	8

Figure C-3shows straight-through Gigabit over copper connector wiring to be used when the crossover function is implemented within the hub or switch.

Figure C-3: Gigabit straight-through wiring for RJ-45 connector

HP NC320T PCI Express Gigabit Server Adapter User Guide C-5