HP NC380T manual Installing an adapter in a server, Connecting the network cable

•Avoid touching pins, leads, or circuitry.

•Always be properly grounded when touching a static-sensitive component or assembly.

Installing an adapter in a server

See the HP ProLiant server documentation for additional information on how to safely install a PCI card in the server.

CAUTION: If the server is not PCI Hot Plug compliant, power it down and unplug the power cord from the power outlet before removing the server access panel. Failure to do so may damage the adapter or server.

1.Power down the server.

2.Remove the power cord and server access panel. Then remove the cover bracket from a PCI Express slot.

WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and the internal system components to cool before touching them.

3.Firmly seat the adapter in a PCI Express slot and secure the adapter bracket.

4.Replace the access panel and plug in the power cord.

Connecting the network cable

Network connections for the NC380T adapter can employ existing UTP CAT5 (or better) cable for Gigabit over copper transmissions. For new installations, CATe (enhanced CAT5) or better cable is recommended.

To secure the cable, plug the cable connector into the RJ-45 port. Ensure that the tab on the plug clicks into position indicating that it is properly seated.

For more information, see UTP cable specifications (on page 11).

Installing an adapter 10