HP nc6000 manual Reverse the above procedure to install the top cover

Removal and Replacement Procedures

4.Turn the notebook right-side up, with the front facing you.

5.Disconnect the RTC battery cable 1 from the system board.

6.Release the ZIF connector 2 to which the TouchPad cable is attached and disconnect the TouchPad cable 3.

7.Lift the right side of the top cover 4 until it rests at a 45-degree angle.

8.Slide the top cover to the left 5 to disengage the audio connectors 6 from the top cover.

9.Remove the top cover.

Removing the Top Cover

Reverse the above procedure to install the top cover.

5–46 Maintenance and Service Guide