HP NEOVIEW 544530-001 manual Prun Command

+>	CNO	VARCHAR(3)	NOT NULL,
+>	CNAME	VARCHAR(22)	NOT NULL,
+>	CDESCP	VARCHAR(25)	NOT NULL,
+>	CRED	INT,
+>	CLABFEE	NUMERIC(5,2),
+>	CDEPT	VARCHAR(4)	NOT NULL,

+> primary key (cno) +>) ;

--- SQL Operation complete.

To run only the commands in the insert section, execute the following :

SQL>obey C:\Scripts\course.sql (insert)

SQL>?section insert

SQL>INSERT INTO COURSE		VALUES
+>	('C11', 'INTRO TO	CS','FOR ROOKIES',3, 100, 'CIS');

---1 row(s) inserted.

SQL>INSERT INTO COURSE VALUES

+> ('C22', 'DATA STRUCTURES','VERY USEFUL',3, 50, 'CIS');

---1 row(s) inserted.

SQL>INSERT INTO COURSE VALUES

+> ('C33', 'DISCRETE MATHEMATICS', 'ABSOLUTELY NECESSARY',3, 0, 'CIS');

--- 1 row(s) inserted.

PRUN Command

The PRUN command runs script files in parallel.

Syntax

PRUN [-d -defaults] PRUN [-sd	-scriptsdir	directoryName]
[-e	-extension	extension]
[-ld	-logsdir logDirectory]
[-o	-overwrite	{y n}]
[-c	-connections	num]

scriptsdir	In this directory, PRUN processes every file with the specified extension. If
	you do not specify a directory or if you specify an invalid directory, an error
	message occurs and you are prompted to reenter the directory. Note: Verify
	that this directory contains valid script files.
extension	The default is .sql.
logsdir	In this directory, PRUN creates a log file for each script file by appending the
	.log extension to the name of the script file. If you do not specify a log file
	directory, PRUN places the log files in the same directory as the script files.
	Note: PRUN puts the prun.err.log summary file in the error subdirectory.
overwrite	If you specify (y), PRUN overwrites the contents of existing log files. By default,
	PRUN keep the original information in the log files and appends new
	information at the end of each file.
connections	Enter a number for the maximum number of connections for the data sources.
	The data source should support this number of connections.

PRUN Command 95