Getting Started
EmulationOptions
The Emulation options in the Connection Wizard Connection Information dialog box are as follows:
The ADDS A2 emulation provides compatibility with software designed to drive the ADDS Viewpoint A2 terminal, as emulated by the Wyse
The AIXTerm emulation provides compatibility with software designed to drive an X terminal using X Windows.
The ANSI BBS emulation is a derivative of the ANSI device driver ANSI.SYS supplied with all DOS based PCs and which provides the screen management for the DOS console screen. PC based UNIX systems and Bulletin Board Systems (BBS) often rely on the ANSI emulation when being accessed by a PC.
The AT 386 emulation provides compatibility with software designed to drive the AT&T AT 386 terminal.
The ATT4410 emulation provides compatibility with software designed to drive the AT&T Dataspeed 4410 terminal. Refer to the AT&T 4410 Emulation section later in this chapter for details.
The BQ 3107 emulation provides compatibility with software designed to drive the Bull BQ 3107 terminal. Refer to the BQ 3107 Emulation chapter for details.
The DG 410/412 emulation provides compatibility with software designed to drive the Data General D410 and D412 terminals. Refer to the DG 410/412 Emulation chapter for details.
The HP
The HZ1500 emulation provides compatibility with software designed to drive the Hazeltine 1500 terminal, as emulated by the Wyse
The IBM 3151 emulation provides compatibility with software designed to drive the IBM 3151 terminal. Refer to the IBM 3151 Emulation chapter for information on this emulation.
The IBM 3270 emulation provides compatibility with software designed to drive the IBM 3270 terminal. Note that the initial display will be an ASCII text screen known as Network Virtual Terminal mode (NVT mode for short). The setting of the IBM 3270 Model option determines the size of the display and whether or not extended attributes are supported. Refer to the IBM 3270 Emulation chapter for details.