Chapter 3

Installing LH 4 Components

Figure 3-5. Removing the Memory Cards

3.Position the memory board on a static-dissipating work surface and remove the DIMMs from their packing materials.

4.Remove a DIMM from its container, handling the module by its ends; do not touch the pins. Lay it on an anti-static surface.

5.Locate the slot in which you will install the DIMM (shown in Figure 3-6). Spread the two retaining clips outward (see Figure 3-7).

Bank 1

Bank 2

Bank 3

Bank 4

20

J1

J2

J3

J4

J5

J6

J7

J8

Figure 3-6. DIMM Slot Location