2Removing Covers and the CPU Baseboard

CAUTION Wear a wrist strap and use a static-dissipating work surface connected to the chassis at all times.

Before you can install the new LH 4 CPU baseboard, there are several components to remove from the LH 3:

∙Remove the bezel and covers 2 and 3 to get access to the HP NetServer’s interior

∙Remove the LH 3 CPU baseboard

∙Remove the old CPU baseboard guide and the air baffle from the LH 3 chassis.

Removing the Bezel and Covers

The HP NetServer has three hand-removable cover panels and a bezel:

∙Cover 1 covers the side where the I/O board is located.

∙Cover 2 covers the area above the CPU baseboard.

∙Cover 3 covers the side where the CPU baseboard is located.

11