Preface

Tools You Need

To install this accessory kit, you need the following tools:

∙An anti-static service kit (3M™ 8501/8502/8503 or equivalent). This kit includes a static-dissipating work surface, a chassis clip lead, and a wrist strap.

Power Supplies Needed

NOTE

You will need to install an HP NetServer LH 3/LH 3r

 

Redundancy Kit as part of the LH 3 to LH 4 conversion, unless

 

the LH 3/LH 3r already contains a second power supply cage

 

and a third power supply. If you want to preserve redundancy,

 

you should also install a fourth power supply. In this case, refer

 

to the HP NetServer Power Supply Upgrade Kit Guide.

 

 

This table shows the power supply configurations for the LH 3 and LH 4 standard and redundant configurations:

LH 3/LH 3r

LH 4/LH 4r

Standard Configuration

1 cage, 2 bricks

2 cages, 3 bricks: 2 in first cage, and 1 in second

Redundant Configuration

2 cages, 3 bricks: 2 in first cage, and 1 in second

2 cages, 4 bricks: 2 in each cage

2