English
hp pavilion fx50 15” lcd monitor Using Your Monitor
Information: displays current settings: Resolution, Horizontal and Vertical frequency.
To access the Recall function, first select Information, then select Recall from the
| Recall: If you press | , factory preset | |
| settings will be recalled. The settings that are | ||
| affected by the Recall function are | ||
| • | Screen Geometry |
|
RECALL |
| ||
EXIT |
| Horizontal Frequency | |
| • | ||
| • | Vertical Frequency | |
| • | Brightness / Contrast | |
WARNING By pressing the 
button all previous adjustments are lost (refer to “Adjusting Your Monitor” on page 9 to adjust the monitor again).
NOTE
Setting the Amount of Displayed Information
To set the amount of displayed information, change the screen resolution of your computer. The higher the screen resolution, the more information you can see on the screen. It is recommended that you use a resolution of 1024 x 768. It is recommended that you use a refresh rate of 60 Hz. The image refresh rate is the number of times per second that the image is redrawn.
LCD technology does not cause any flicker at low refresh rates.
Minimizing Energy Consumption
If your computer supports VESA monitor power management (available on many HP computers), you can minimize the power consumed by the monitor. There are two power saving modes:
•Suspend mode (uses less than 5W)
•Sleep mode (uses less than 5W)
18 | English | X |
