2.Insert the paper print-side down in the center of the tray.

Make sure the stack of paper is inserted as far inside the printer as possible and does not exceed the lower line marking in the tray. For more help, refer to the diagram engraved in the tray.

If the photo paper has a tab along one edge, make sure the tab is pointing towards the front of the printer.

NOTE: Do not load paper while the printer is printing.

3.Slide the paper-width guides in the tray until they touch the edge of the stack of paper, and then reinsert the tray.

4.Pull out the output tray extension until the intended paper size is reached.

26 Chapter 2 Get started

ENWW