HP Projer TC33096003 2 Installing Data Protector Express, Launching the Installer, Using the Data Protector Express Installer, On Windows, On Linux, Installing

In this section

You must have Administrator access to install Data Protector Express.

1.Insert the Data Protector Express CD-ROM in your CD drive. The Data Protector Express Installer launches automatically.

2.If it does not launch automatically, access the root directory on the Data Protector Express CD-ROM and double-click setup.exe.

You must install Data Protector Express as the root user.

1.Insert the Data Protector Express CD-ROM.

2.If auto-mount is not enabled on your system, you must mount the CD-ROM yourself. Refer to the following example for some Linux systems:

a.Access a terminal window.

b.Type

mount /dev/cdrom /mnt/cdrom and press Enter.

c.Wait a moment for Linux to mount the CD-ROM.

3.Access the root directory on the CD-ROM. For example, on some Linux systems, type

cd /mnt/cdrom

and press Enter to access the root directory on the installation CD-ROM.

NOTE:

If Data Protector Express is running, you must close it before continuing.

4.To run the installation program, type

./install

as the root user and press Enter.

To install Data Protector Express:

1.Launch the installer.

Installation Guide