444Push the SD/SDHC card into the memory slot until it clicks into place. If the card does not click into place, repeat the previous step to ensure proper orientation.

555Close the Battery/memory card compartment.

-To remove the SD/SDHC card

111Make sure to power off the camera before proceeding. Removing the memory card while powered on may damage the card and camera.

222 Open the battery/memory card compartment.

333Gently push the card until it clicks and pushes our of position.

444 Carefully pull out the card.

Charging the Battery

The battery that comes along with your package is not fully charged. You need to charge the battery before using the camera.

111Insert the battery into the battery charger as shown.

222Connect the power cord to the battery charger.

333Plug the power cord to the main outlet. The battery charging time is 2 hours.

3

Page 5
Image 5
HP PW460t manual Charging the Battery, To remove the SD/SDHC card