3

Installation

1. Select the mounting location.

Select a mounting location where there are guide bars on the conveyor. This will keep the print head at the correct distance of 1/8” (3mm) from the product preventing damage to the QM2. CAUTION: Avoid contact between the QM2 and the product as print quality may suffer.

2.Mount the base clamp to the conveyor or floor.

Mount the QM2 to a solid structure such as a conveyor side rail. For floor mounting, secure the base clamp to the floor using concrete anchors. Use standard 18 mm tubing. Support the unit to prevent the print head from swaying or vibrating.

NOTE: the conveyor side rails should be 1/8” x 2.5” or greater steel.

3. Assemble the bracketry to the base clamp.

Make sure the bracket is mounted securely. You want to avoid sway and vibration in the print head. This will greatly affect print quality.

MSSC, LLC Collinsville, IL USA Tel: 618-343-1006 Fax: 618-343-1016 55999 9 July 2008

www.msscllc.com