7 Using the Setup Menu
The Setup Menu allows you to set preferences for the camera’s behavior.
1.While in Live View or Playback, press 
, then use 
to highlight 
.
2.Use 
to highlight a menu option, then press 
to display the menu option’s sub-menu.
3.Use 
to highlight a setting, then press 
.
4.To exit the Setup Menu, press 
.
Settings you specify remain until you change them.
Display Brightness—Adjusts the brightness of the Image Display.
●Low—For extending battery life.
●Medium (Default)—For normal viewing conditions.
●High—For very bright lighting conditions.
Sounds Volume—Adjusts the speaker volume for camera sounds (such as button presses and shutter clicks) and recorded audio.
Off, Low (Default), High.
Focus Assist Light—Enables the focus assist light used in low-light situations. You may want to turn off this feature when you do not want to distract the subject of your picture.
Auto (Default), Off.
Display Timeout—Specifies the time after which the Image Display turns off if you do not press a button.
Never, 15, 30, 45 (Default), 60 seconds.Instant Review—Adjusts the time an image or video clip is displayed in
Instant Review.Off, 1, 2 (Default), and 4 seconds.
Digital Zoom—Enables or disables digital zoom.
On (Default), Off.
Date & Time—Sets the date and time. See Set the date and time on page 9.
USB Configuration—Specifies how a computer recognizes the camera. See Connecting to the computer on page 39.
●Digital Camera (Default)——Recognizes the camera as a digital camera using PTP (Picture Transfer Protocol).
●Disk Drive—Recognizes the camera as a disk drive using MSDC (Mass Storage Device Class).
